1 Task T6.2 Tertiary Buildings infrastructures installationsWP6 Pilot Set-up, Model Calibration and Assessment Task T6.2 Tertiary Buildings infrastructures installations CNet / CERTH
2 Overview Selected DEMO Pilot sites at CERTH ITI BuildingEquipment Procurement / Installation Status per space Sensor Integration to LS and Data Availability through IAM Detailed presentation of equipment installation at DEMO Areas Equipment Installed for DEMO at CERTH
3 CERTH Pilot areas selected for DEMOSelected CERTH ITI Building areas: 1st Floor: Developer’s Office, Meeting Room, Corridor & Rest Area Ground Floor: ITI Kitchen ITI Building 1st Floor ITI Building Ground Floor
4 Equipment Procurement / Installation Status per spaceDeveloper’s Office Meeting Room Corridor & Rest Area Kitchen Add Dimmable Lights Done - Replace Lights Actuators No Door Double-Beam Sensors Installed Indoor Luminance Acoustic Sensors External Temperature + Luminance Installed at the South – West side of ITI’s Building. RFID First Trials Pending Water Heater Refrigerator
5 Sensor Integration to LS and Data Availability through IAMPilot Installation (CERTH) LS IoT Implement. (CNet) Integration to LS – Mapping (CNet) Data Stored in IAM (TUK) HVAC Monitoring: Status & Room Temp HVAC Control: ON/OFF and Set Temp OPC Server OK Mapping Started – Pending NO Lighting Monitoring & Control EnOcean Actuators NO – Integration Pending HVAC & Light Energy Consumption EnOcean Clamps OK ( for the DEMO) CO2 / Temp/Hum OK [2] OK [1] (Mapping Pending) Indoor Luminance OK [7] OK [4] (Mapping Pending) Outdoor Luminance/Temp/Humid
6 Sensor Integration / Data Availability PlanningPilot Installation IoT Implem. (CNet) Integration to LS – Mapping (CNet) Data Stored in IAM (TUK) Occupancy Sensor Data (Kinect, PIR, Double Beams etc.) OK OK? Occupancy Extraction Events ( Occupancy /Prediction per Space) Office & Home Appliances Monitoring & Control (PC Screens, printers, Microwave Ovens, etc.) SmartPlugs [37] OK [37] OK [32] (Mapping Pending)
7 Developer’s Office – Occupancy Extraction5 Kinect Cameras installed Re-configured and tested 5 different topologies Optimized Topology selected utilizes 5 Kinect Cameras (due to obstacles in the office) Exact Number of Occupants for 4 sub-spaces
8 Developer’s Office – Occupancy ExtractionMotion Detectors Passive Infrared Radars + Magnetic Traps (Alarm System integration) Real Time Response Time High Accuracy Low cost solution Used for RFID automated Control
9 Developer’s Office – Occupancy ExtractionDoor Counters Active Infrared Double-Beams High Accuracy Low Cost Pressure Mats Medium / Low Accuracy Extremely Low Cost Connected to Arduino – integrated to LS through MySQL Provide Occupant’s Direction Will be used to trigger RFID Control Combination scenarios will further be tested to check accuracy gain compared to separate solutions
10 Developer’s Office – User Profiling – Energy ConsumptionSmart-plugs monitoring & control + consumption measurement HVAC monitoring + controls Already installed on most office appliances LS - OPC Implemented, Integration Pending 7 x PC Towers ( No Control ) Actual Temperature 8 x PC Monitors ( On/Off Control) Set Temperature 1 x Printer (On/Off Control) On/Off Status Lighting monitoring + controls (Dimmable – EnOcean) Replaced all Lights with Dimmable ones (to allow User Profiling scenarios to be tested) Dimmable actuators installed LS Integration Implemented Validated both Read & Send Control Commands through LS On/Off Dimming Level
11 Developer’s Office – User Profiling – Energy ConsumptionWireless EnOcean Power Meters with Clamps installed for both HVAC & Lighting Measurement of AC Current Environmental Temperature (through HVAC) Each Thermal Zone returns the respective value BACNet Protocol – OPC Server 3 Luminance Sensors Installed Each Visual Zone is covered separately Wireless EnOcean Sensors
12 Developer’s Office – ZonesThermal Zones Visual Zones Occupancy Zones
13 Meeting Room – Occupancy ExtractionMotion Detectors Door Counter (Double-Beams) CO2 Late Response Time Environmental Disturbances Acoustic Sensor (connected to Arduino)
14 Meeting Room - User Profiling – Energy ConsumptionHVAC monitoring + controls Lights are measured by the EnOcean Actuators LS - OPC Implemented, Integration Pending HVAC consumption will be simulated through Models Lighting monitoring + controls (Controllable – EnOcean) Hardware Installation Competed LS Integration Implemented, Validation Pending On/Off Smart-plugs: Monitoring & Control + consumption Measurements All Available Plugs (power-strips) covered – Group Based Measurements
15 Meeting Room - User Profiling – Energy ConsumptionEnvironmental Wireless EnOcean Indoor: Temperature /Luminance Outdoor: Temperature / Luminance/ Humidity DEVELOPER’S OFFICE MEETING ROOM Luminance Temp / Hum
16 Corridor & Rest Area - OccupancyMotion Detectors Acoustic Sensor (Connected to Arduino)
17 Corridor & Rest Area – User Profiling – Energy ConsumptionEnvironmental HVAC monitoring + controls Temperature / Luminance (+ Motion) LS implementation ok Lighting monitoring + controls Integration Pending Hardware Installation Pending (Not available for the Demo Pilot) LS Integration & Validation Pending Smart-plugs monitoring + control + consumption SmartPlugs to all Office Appliances Smart Water Heater Pending Energy Consumption No - Lights & HVAC will be simulated
18 Corridor & Rest Area - ZonesThermal Zones Visual Zones Occupancy Zones
19 Kitchen – Occupancy ExtractionKinect Cameras Depth Image Utilization Validated Real Time Occupancy Extraction Optimized Topology for Occupants Exact Number Acoustic sensor (connected to Arduino)
20 Kitchen - Occupancy Occupancy Extraction Motion DetectorsDoor Counters Active Infrared Beams CO2 / Temp / Hum Extract occupancy through appliances Usage as received through Smart Plug monitoring) Pending to be tested
21 Kitchen – User Profiling & Energy ConsumptionHVAC monitoring + controls Lights are measured by the EnOcean Actuators Lighting monitoring + controls HVAC will be simulated through DER models (Controllable – EnOcean) Hardware Installation Competed LS Integration Implemented, On/Off Smart-plugs Monitoring & Control + Consumption measurement All Home Appliances are Being Measured LS Integration Implemented & Validated
22 Kitchen - Zones Thermal Zones Visual Zones Occupancy Zones
23 RFID Deployment for DEMOInitial trials with demo equipment Installation pending 4 x Antennas 1 x 4-port Reader
24 Equipment Installed for DEMO at CERTHDeveloper’s Office Corridor & Rest Area Meeting Room Kitchen Total Kinect 5 - 1 6 PIR 3 Active Infrared Double-Beams 4 2 8 Pressure Mats Acoustic CO2 / Temperature / Humidity Indoor Luminance 7 Outdoor Luminance Outdoor Temperature / Humidity Smart-Plugs 16 28 Dimmers Actuators Indoor HVAC Cassettes ( Temp )
25 Questions & DiscussionThank You !!!